DC MOTOR PUMP GROUP one
General Description
Consisting of the hefty duty DC motor and the CB1S gear pump, this pump motor group is surely an ideal hydraulic electrical power unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
General Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a four.5″ DC motor in addition to a CBSR gear pump which has a common electrical power up/gravity down circuit that has a relief valve, a test valve and a solenoid release valve.
Distinctive Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic elements concerned ahead of mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~68 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is suggested.
4. The power unit really should be mounted horizontally.
5. The relief valve pressure is preset about 25% greater than the operating pressure.
six. Flow control valve for lowing velocity adjustment is accessible unpon request.