one.A connecting hyperlink of an O-ring Chain for common application is pre-coated with grease in the pins. In advance of connection, confirm the grease around the surfaces of pins, and should the amount of grease is smaller, apply grease with bare hands. (If gloves are utilized, the grease is going to be absorbed through the gloves.)
Instance: Once the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted with the roots from the pins. Should the O-rings come loose due to vibration throughout 
transport, refit the O-rings in to the roots in the pins.
In this instance, you’ll want to return the grease collected at the roots of the pins towards the central surfaces with the pins, a lot more at portion A than at portions B proven within the over illustration. (Portions A is worn because of sliding using the bushings.)
two.The chain could be most conveniently linked over the teeth of the sprocket. Engage the back links at each ends on the chain with all the sprocket teeth and fit connecting pins. If your sprocket could be moved, the chain may also be linked over the loosened side.
three. Connecting procedure
one.Confirm that O-rings are attached to your roots with the pins.
2.Should the volume of grease applied around the connecting pins is compact, coat the pins with grease with the central portions.
three.Insert the connecting pins in to the bushings of your inner hyperlinks at each ends.
four.Verify the grease is utilized on the entire encounter of your O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, set up the spring clip. Confirm no matter whether the head (the end with no split) with the spring clip is turned in the feeding path in the chain. (See the next illustration.)
six.You’ll want to confirm the spring clip is securely fitted during the clip grooves in the connecting pins.
This completes jointing with the connecting hyperlink. Note that grease within the surfaces of connecting pins and O-rings can be removed throughout installation function. In this instance, re-grease working with the grease over the surface on the base chain or even the grease from the polyethylene bag in which the connecting link was contained.
