SNOW PLOW Power UNIT

Standard Description
Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials managing equipment. The decreasing movement is achived from the solenoid valve with the reducing velocity controlled by an adjustable needle valve. The left and suitable functions are outfitted which has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please consult our product sales engineer for that different pump displacement, motor electrical power or tank capacity.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned before installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which must also be clean and totally free of impurities.N46 hydraulic oil is encouraged.
four. This electrical power unit really should be mounted horizontal.
five. Check the oil level while in the tank immediately after the first start off on the electrical power unit.
six. Oil shifting is needed after the first 100 operation hours, afterwards the moment each and every 3000 hrs.